Author Topic: No$gba emulator updated!  (Read 5335 times)

0 Members and 1 Guest are viewing this topic.

Offline AsPika3172

  • Newbie
  • *
  • Posts: 23
No$gba emulator updated!
« on: May 07, 2016 - 12:47:55 »
Martin Korth @ nocash is now updated his No$gba into version 2.8c for Nintendo DS, DS Lite & DSi right now! Change log!

Quote
07 May 2016 - no$gba version 2.8c
- webpage: added some dev forum links ([You are not allowed to view links] Register or Login and [You are not allowed to view links] Register or Login)
- help: added "us" to known dsi-regions (including its countries and languages)
- dsi: re-ordered wram as C-then-B (fixes 3780000h boundary issue on us/sysmenu)
- dsi/wifi/help: added specs for WMI commands/events (and for BMI boot-commands)
- dsi/sdmmc/help: added sd/mmc state info (specs when/which command can be used)
- dsi/softreset: allows rebooting dsi firmware via NUM-* (reinit DSi registers)
- dsi: can boot NDS games from within DSi mode (tweaks non4MB via fake_scfg_ext)
- dsi: supports NDS-backwards-compatibility-touchscreen mode (for NDS games)
- dsi: supports NDS-bios-mapping in DSi mode (for NDS games booted via sysmenu)
- dsi: supports firmware-coldboot (when bios_intro enabled with nds_mode=DSi)
- dsi: bugfixed jumps in new wram via addr_code_table (fixes many DSi problems)
- dsi/help: added DSi Atheros Wifi I2C EEPROM info (access and partial content)
- debug/gui: fixed system colors used for cpu-flag checkboxes (swapped red/blue)
- dsi/help: added notes on dumping wifi bios, and on dumping dsi keys from 3ds
- dsi/help: added flipnote fileformat, added notes on \shared2\0000 file
- nds7: emulates disabled bios area being FFh-filled (define_nds7_bios_rom)
- aes: forces instant completion on aes-body-len-zero (boot sysflaw via sysmenu)
- sdio/wifi: initializes 0500458h to ZERO (indicating not firmware yet uploaded)
- dsi/bugfix: moved "sdmmc_try_drain_write_buffer" after status/state handling
- dsi: wifi init mimmicked good enough to run bootcode without WLFIRM 2 error
- dsi/sdmmc: supports card_irq
- dsi/i2c: omits ACK response on non-existing devices (especially A0h/E0h cams)
- dsi/misc: omits arm7 warning on 4004001h access, sets DSi flag in cart.chip.id
- dsi: emulates SCFG_MC register (else hangs after starting a game in bootmenu)
- xtensa: auto-resolves special registers mov opcodes to symbolic sfr_xxx names
- dsi/loader: supports loading AR60xxG.rom (for disass at atheros:8E0000h)
- dsi/mapping: supports MBK mapping to TEAK memory space (for teak disassembler)
- dsi/sdmmc: supports WRITE_MULTIPLE command (requires eMMC image with CID+ID)
- dsi: supports 32bit 4004D00h read, and more 16bit/32bit access for other ports
- dsi/jpeg/help: added notes on computing jpeg/exif MAC signatures (via AES-CCM)
- dsi/sdmmc: emulates fifo16/fifo32, irq-edge-triggering, fixed bits, etc.
- dsi/help: added lots of details on sd/mmc/sdio controller's I/O ports
- dsi/help: updated dsi exploits chapter (notes on resurrected dsiware hax, etc)
- dsi/help: addded teak instruction set specs (encoding, syntax, params)
- dsi/help: added atheros/wifi registers specs (for sdio side and xtensa side)
- dsi/debug: added teaklite II disassembler (see menubar, window, teak)
- dsi/wifi/debug: added xtensa disassembler (see menubar, window, atheros)
- dsi/wifi/help: added xtensa/cpu instruction set and xtensa/cpu register map
- dsi/sdio: partial sdio/atheros simulation (passing most of "PRE-AUTH" phase)
- dsi/help: added sdio specs (cmd52/cmd53 and cccr, fbr, cia areas)
- dsi/boot: fixed initialization of emmc-info in main ram
- dsi/help: added various details (initial ram, etc.)
- nds/debug: optional IPC fifo send/recv logging (in tty debug message window)
- dsi/bptwl: supports writing BPTWL registers (except invalid/readonly ones)
- debug/tty: displays sd/mmc command names, and resolves sdio func:addr's
- debug: accepts mirror of 3800000h at 3FF0000h without warning (common on dsi)
- dsi/help: details on tmd, tickets, and big-endian aes-cbc decryption

Download it here!

[You are not allowed to view links] Register or Login

EDIT:- Change thread title!
« Last Edit: May 28, 2016 - 01:42:45 by AsPika3172 »

Offline john85funky

  • Newbie
  • *
  • Posts: 27
Re: No$gba is now version 2.8c right now!!!
« Reply #1 on: May 12, 2016 - 21:04:03 »
thanks for this info !
 ;)

Offline AsPika3172

  • Newbie
  • *
  • Posts: 23
Re: No$gba emulator updated!
« Reply #2 on: May 28, 2016 - 01:44:02 »
Version 2.8d was updated!!!

Quote
26 May 2016 - version 2.8d
- dsi/rsa: supports unencrypted "rsa" signatures (via hooked RSA swi functions)
- dsi/sdmmc: supports NDMA sdmmc start condition (for SD data32 read/write)
- dsi/sdmmc: supports SD card initialization (CMD0,2,3,7,8,9, ACMD6,13,41,42,51)
- dsi/sdmmc: created/included empty sd-card-image (file dsi-1.sd, in dsi-sd.zip)
- dsi/sdmmc: fixed irq-retriggering (recurse irq_stat on irq_mask changes)
- dsi/sdmmc: adjusts insert/eject and write-protect flags depending on dsi-#.sd
- dsi/sdmmc: prevents RXRDY in DATA32 mode (@@skip_rxrdy_in_data32_mode)
- dsi/help: added notes on EMPTY sd-image (dsi-#.sd) (DSi SD/MMC Images chapter)
- dsi/help: added notes unencrypted signatures (see BIOS RSA Functions chapter)
- dsi/help: added notes on encrypted twl-*.der files (in "verdata" NARC file)
- dsi/help: added CRC32 checksums for currently known/dump-able DSi-BIOS areas
- dsi/debug: shows insternal sd/mmc registers in iomap screen (cid,csd,csr,src)
- sample: updated magic floor gba/nds version, now with working dsi cart header

Download it at Nocash website. See post number 1.

Offline WickedOne

  • Jr. Member
  • **
  • Posts: 67
Re: No$gba emulator updated!
« Reply #3 on: October 23, 2016 - 00:29:11 »
This still exists? Wow. I have been out of emulation for too long. Wait... I confused it with No$gb emulator :)
« Last Edit: October 23, 2016 - 00:30:52 by WickedOne »
The social dynamics of the net are a direct consequence of the fact that nobody has yet developed a Remote Strangulation Protocol. (Larry Wall, creator of Perl)